FireLock NXT™ Quick Riser Dry System Check Valve, Series/Model: Series 768, Nominal Size: 6 IN, Connection Type: Grooved End, Pressure Rating: 300 PSI Working, 600 PSI Test, Ductile Iron Body Material, Seal Material: Peroxide Cured EPDM, Material Standard: Body: ASTM A536/A395 Grade 65-45-12/65-45-15, Industry Standards: C/US UL Listed, FM Approved, VDS, LPCB 104c/01, CE Certified, 22 IN Width, 46 IN Height, Lead Free: No, Additional Specifications: Flow Co-Efficient (Cv): 1000
|
Sub Brand
|
:
|
FireLock NXT™
|
|
Item Name
|
:
|
Dry System Check Valve
|
|
Type
|
:
|
Quick Riser
|
|
Series/Model
|
:
|
Series 768
|
|
Nominal Size
|
:
|
6 IN
|
|
Connection Type
|
:
|
Grooved End
|
|
Pressure Rating
|
:
|
300 PSI Working, 600 PSI Test
|
|
Body Material
|
:
|
Ductile Iron
|
|
Seal Material
|
:
|
Peroxide Cured EPDM
|
|
Material Standard
|
:
|
Body: ASTM A536/A395 Grade 65-45-12/65-45-15
|
|
Industry Standards
|
:
|
C/US UL Listed, FM Approved, VDS, LPCB 104c/01, CE Certified
|
|
Width
|
:
|
22 IN
|
|
Height
|
:
|
46 IN
|
|
Lead Free
|
:
|
No
|
|
Additional Specifications
|
:
|
Flow Co-Efficient (Cv): 1000
|
The patent-pending Victaulic series 768 FireLock NXT™ dry valve is a low differential, latched clapper valve that uses a unique direct acting diaphragm to separate system water supplies from dry-pipe sprinkler systems.
- The low differential, unique latch and actuator design of the valve allows the valve to be reset without opening the valve
- The low differential design is not subject to water columns
- The valve allows the water to operate a water motor alarm and/or electric pressure alarms, which continue until the flow of water stops
- With the optional accelerator, the valve can be configured to respond faster for use in larger systems, or where faster response times are required
- The valve is rated to 300 PSI/2065 KPA water working pressure and is factory tested hydrostatically to 600 PSI/4135 KPA for sizes 1-1/2 - 8 IN/40 - 200 MM
- VDS trim configurations are approved to 16 BAR
- Required air pressure for all trim variations is 13 PSI/90 KPA
- The Victaulic series 768 FireLock NXT™ dry valve is made of high-strength, low-weight ductile iron, and it offers easy access to all internal parts
- All internal parts are replaceable
- Maintenance and service can be performed without removing the valve from its installed position
- The rubber clapper seal is replaced easily without removing the clapper from the valve
- The valve is painted inside and out to increase corrosion resistance
- The body is tapped for main drain and all available trim configurations
-
Brochure
https://www.macombgroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_S014768405_Brochure.pdf
-
Catalog
https://www.macombgroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_1000G107CE_Catalog.pdf
-
Specification Sheet
https://www.macombgroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_S014768405_Specification_Sheet.pdf