4 SHORTSTOPP FLAT BOTTOM

Flat-bottomed tees are designed for hot tap tie-ins of lateral taps and crossover connections, eliminating need for a valve on the connection. The flat-bottomed tee is provided with a weld bevel. TDW recommends the review of approved welding procedures for the appropriate gaps between the flat-bottomed tee and the header pipe. To isolate flow or pressure into connecting lines, the side outlet of the tee can be plugged with TDW Shortstopp® 60 plugging machine equipment at pressures up to 60 PSI or with Shortstopp® II at pressures up to 150 PSI.

TDW Flat-Bottomed Tee, Sub Brand: Shortstopp®, Item Name: Flat-Bottomed Tee, 4 IN Nominal, Flanged Connection, 285 PSI Maximum Pressure, -20 to 100 DEG F, Industry Standards: ASME B31.8, Additional Specifications: For Use With Shortstopp® 60, Shortstopp® II and Shortstopp® 275 Plugging Machines, 35 LB Weight

• Type IIa flat-bottomed tee requires a reusable, bolt-on flange adapter which adapts the tee to valves with ASME Class 150 bolt patterns
• When used with Shortstopp® plugging machines, the maximum recommended working pressure and temperature should be limited to that of the plugging equipment, but not exceeding that of the fitting itself
• All fittings are compatible with most ASME Class 150 applications

• Specification Name https://www.macombgroup.com//ASSETS/DOCUMENTS/ITEMS/EN/WILLIAMSON067239040001_Spec.pdf