16.00 WELD REINF SLEEVE, 1/2 X 12

Pipeline engineers assure the safety of field joints by installing Dresser style 110 reinforcing sleeves on welded joints where special precautions are required. Style 110 sleeves can used on defective trouble spots on piping systems, at highway, river and railroad crossings, at over bends, at tie-ins, in marshy ground, near buildings, and other places where special precautions are necessary. The style 110 sleeve lends itself to field welding without preheating, using ordinary field welding procedures. All sleeves are factory prepared with standard welding bevel, machine-flame cut for uniformity and ease of welding, and come with a drilled vent hole to preclude pressure build-up between sleeve and pipe. Built to rigid Dresser specifications, style 110 sleeves have a minimum yield strength of 50000 PSI and an ultimate strength of 70000 PSI. Style 110 sleeves are supplied in all standard sizes, lengths and thicknesses.

Dresser Reinforcing Sleeve With Vent, Type: Girth Weld, Reinforcing Sleeve With Vent, Series/Model: Style 110, 16 IN Nominal, 1/2 IN Wall Thickness, Carbon Steel, Material Standard: Body: ASTM A572 Grade 50, 50000 PSI Maximum Pressure, -20 To 150 DEG F, 16 IN Inside Diameter, 17-1/2 IN Outside Diameter, 12 IN Length, Other Physical Dimension: 1/2 IN Thickness

• Pipelines at critical road, rail and river crossings
• At over bends, or at tie-ins
• In marshy ground, or other environmentally sensitive areas
• Near buildings or other high consequence areas

• Brochure/Catalog Name https://www.macombgroup.com//ASSETS/DOCUMENTS/ITEMS/EN/DRESSER01100003005_Broc.pdf