Can't find a product? Call now! 888-756-4110
Spirax Sarco FTI-30 Cast Iron In-Line Flow Pattern Float And Thermostatic Steam Trap, 3/4 IN, NPT, 30 PSI
The Spirax Sarco FTI contains a float valve mechanism which modulates to discharge condensate continuously at steam temperature while non-condensable gases are released by a separate internal balanced pressure thermostatic air vent. The in-line piping connections simplify installation.
In-Line Flow Pattern Float And Thermostatic Steam Trap, Series/Model: Model FTI-30, Nominal Size: 3/4 IN, Connection Type: NPT, Pressure Rating: 30 PSI, 0.218 IN Orifice, Cast Iron Body Material, Material Standard: ASTM A126 Grade B, Temperature Rating: 232 DEG C, Length: 4.8 IN, Other Physical Dimension: 6-1/2 IN Width, Additional Specifications: Capacity: 1370 LB/HR
| Item Name | : | In-Line Flow Pattern Float And Thermostatic Steam Trap |
| Series/Model | : | Model FTI-30 |
| Nominal Size | : | 3/4 IN |
| Connection Type | : | NPT |
| Pressure Rating | : | 30 PSI |
| Orifice | : | 0.218 IN |
| Body Material | : | Cast Iron |
| Material Standard | : | ASTM A126 Grade B |
| Temperature Rating | : | 232 DEG C |
| Length | : | 4.8 IN |
| Other Physical Dimension | : | 6-1/2 IN Width |
| Additional Specifications | : | Capacity: 1370 LB/HR |
| Weight | : | 11.300 LB |
The FT and FTI Float & Thermostatic steam traps are traditional cast iron products available with either parallel (FT) or in-line (FTI) connections. These traps are offered for steam pressures up to 200 PSIG and condensate loads to 10000 LB/HR. The stainless steel air vent, fl oat and valve eliminate air binding, resist corrosion and allow for continuous drainage of condensate.
Application: Used in air heating coils, heat exchangers, steam main drip stations, small process equipment, particularly when controlled by a modulating temperature control valve; replacement of less efficient inverted bucket traps on unit heating equipment