ZipStick™ Zip Hanger, Series/Model: Series 553-0, Conduit/Pipe Size: 1 IN CTS - 6 IN IPS, Maximum Load: 50 LB At 32 DEG F, 50 LB At 72 DEG F, 25 LB At 140 DEG F, Material: High Heat Polypropylene, Industry Standards: UPC Listed, IAPMO File Number 3540 Listed, Finish/Color: Black, Length: 14 IN, 7/8 IN Width, Other Physical Dimension: 3/4 IN Zip Strap Width, 1 IN Nailway Spacing, 23-1/2 IN Strap Length

Sioux Chief ZipStick universal pipe hanger shall be used where necessary to support DWV piping according to all national code requirements. Hanger shall be noncorrosive and UV-resistant. Hanger shall be impact resistant to 0 DEG F, and be able to withstand temperatures up to 140 DEG F. Hanger shall be marked with manufacturer's name. Hanger shall have two pre-loaded zinc plated, rust resistant nails. Nails shall have a continuous rink shank to provide a more permanent installation. Hanger shall feature I-beam stem design for strength and rigidity and a high heat strap with a releasable locking mechanism. Hanger stem may be snapped off or cut to create a shorter hanger for tight spaces. Hanger stem may be extended buy using optional stainless steel L-bracket and all-thread rod with approved hardware. L-bracket shall be secured to hanger stem using two #8 screws (provided). Hanger may be used to support wrapped or insulated pipe, bundles of flexible tube, cabling or wire or supporting vent pipe in attics. Universal strap can support 1 IN CTS to 6 IN IPS. Additional straps may be used to extend the strap length to hang flexible ducting or similar objects of larger diameter, which do not exceed the load ratings listed on this specification.

• Hanger shall be non-corrosive and UV resistant
• Hanger shall be impact resistant to 0 DEG F, and be able to withstand temperatures up to 140 DEG F
• Universal cradle hangs any pipe from 1 IN CTS to 6 IN IPS
• Releasable locking mechanism
• UV resistant, corrosion-proof, impact-resistant ABS stem
• Hanger shall feature I-beam stem design for strength and rigidity and a high heat strap with a releasable locking mechanism
• Hanger stem may be snapped off or cut to create a shorter hanger for tight spaces
• Fastener shall have a preloaded nail, which shall be rust resistant
• Fastener shall snap onto CTS tube and allow for expansion and contraction
• Fastener shall be designed to avoid tube damage if nail is overdriven
• Nails shall have a continuous ring shank to provide a more permanent installation
• Additional straps may be used to extend the strap length to hang flexible ducting or similar objects of larger diameter

Application: Perfect for hanging DWV, wrapped or insulated pipe, bundles of PEX, cable, wiring or supporting vent pipe in attics

• Specification https://www.macombgroup.com//ASSETS/DOCUMENTS/ITEMS/EN/14AZS_spec.pdf